Instru Sonicator
Revision as of 13:45, 7 June 2015 by Hekkcess (talk | contribs) (Created page with "== Introduction == Sonicators or sonication http://en.wikipedia.org/wiki/Sonication baths are used to dissolve chemicals in solutions or to lyse cells (amongst other thin...")
Introduction
Sonicators or sonication http://en.wikipedia.org/wiki/Sonication baths are used to dissolve chemicals in solutions or to lyse cells (amongst other things) by means of ultrasound. The bath is mostly used to dissolve chemicals while the rod type, more powerful is used to lyse cells.
The sonication bath
The bath is mostly used to dissolve chemicals. Temperature can be set to help dissolution. This bath has only a single sonication power.
Functions
- A) On/Off button
- B) Sonication timer
- C) Temperature setup
- D) Bath
Rules
- 1) Never sonicate empty. You can use normal tap water but nothing else than water.
- 2) Once done, empty it, wash it and put it back into place.
- 3) Don't set water temperature above 100°C. If warming up higher than 60°C put a notice, warn people around you and don't leave it unattended.
- 4) Take care of electrical plugs around as well.
The sonication rod
The sonication rod is more powerful and can destroy cells much more easily. It can be rather noisy and can in some case hurt people's hears Due to its power it can generate some heat and in the case of cell lysis, they should be held in ice during manipulation
TO COME ----