Difference between revisions of "Pushing the P1"

From Hackuarium
Jump to navigation Jump to search
Line 330: Line 330:
 
==Lab Setup==
 
==Lab Setup==
 
An idea: Can be discussed
 
An idea: Can be discussed
[[File:GH_P1.png|300px|thumb|center|the essential in 12m2]]
+
[[File:GH P1.PNG|300px|thumb|center|the essential in 12m2]]

Revision as of 22:08, 20 September 2016

Introduction

Having a laboratory and instruments is one thing, possessing the tools to do actual biology research is another thing. For close to two years now, the Hackuarium community has built a space, where people can work on projects related to biology among other fields. The ambition of the international DIY biology scene is to bring to the people the tools to perform and work on the whole range of biological applications, as qualitatively and cheaper than what the industrial or academic institutions do. To achieve such level, the Hackuarium lab has to be upgraded to a higher level of competency. One aspect is the P1 biosafety level where genetic manipulation opens the door to a vast range of research topic and engineering opportunities. This scientifically enriching, yet delicate step, is now in motion but in order to start practicing several items involving legal, technical and community topics have to be settled. Indeed, our laboratory practices and transparency as a citizen lab have to be absolutely irreproachable. The challenges we face are described in this document.

We will prepare for the P1 work assuming it will start out in bacteria, and then depending on future demands, we imagine adding other organisms.

The future lab configuration

Timeline

Here is the basic timeline we will try to keep in order to make the project move on. It is obviously a "best case scenario" approximation.

Proposed timeline for the project



The schedule could not be held due to renovations in the building

Critical Points

What we need to sort out before we start:

Announce the first activities

YES, Luc has a form

Will the enclosure be satisfactory?

YES, but it may be a good idea to inform the Canton

Do we need a bio safety officer? Does this person need a specific training?

Legally yes! I think it is good if 2-3 people get this training, either at EPFL, or in Bern.

Risk assessment

  • The biological risk assessment will be made through the form each member as to fill when he creates a new genetically modified strain to ensure no pathological or harmful gene is inserted in the micro-organism.
  • Chemically, any inflammable liquid will be stored in the solvent cabinet. The acids and bases will be separated in two "geographically" remote cabinets. The bottles will be stored close to ground level in a resistant container able to contain the full volume of the bottles it contains to avoid spillage.

Waste elimination

-> OK (see below)

Federal Coordination Centre for Biotechnology (where you have to notify level 1 activities with GMOs):
http://www.bafu.admin.ch/biotechnologie/01744/01745/index.html?lang=en

BSO-Curriculum (courses for biosafety officers):
http://www.bafu.admin.ch/biotechnologie/01744/02964/index.html?lang=en

Cantonal authority (Vaud, contact persons)
-Isabelle Dessaux (isabelle.dessaux@vd.ch )
-Olivier Gianina (olivier.gianina@vd.ch )

Our (very helpful) contact is:

Manuela Ocaña
Collaboratrice scientifique, PhD

Département fédéral de l'intérieur DFI
Office fédéral de la santé publique OFSP
Unité de direction Santé publique

Schwarzenburgstrasse 157, 3003 Berne
Tél. +41 58 462 63 66
Fax +41 58 462 62 33
manuela.ocana@bag.admin.ch
www.bag.admin.ch

Her initial email was as follow:

Bonjour,

L’office fédéral de la santé publique (OFSP) est, en collaboration avec l’office fédéral de l’environnement (OFEV), responsable pour les aspects de sécurité biologique en Suisse. L'ordonnance sur l'utilisation des organismes en milieu confiné (ordonnance sur l’utilisation confinée, OUC ; RS 814.912) règle l'utilisation d'organismes génétiquement modifiés, pathogènes ou exotiques en milieu confiné (par ex. laboratoires de recherche, de diagnostic ou d’enseignement et développement). Cette ordonnance a pour but de protéger l’être humain, les animaux et l'environnement des menaces et atteintes possibles résultant de l’utilisation en milieu confiné de tels organismes. Les instituts, les entreprises et les organisations qui utilisent des organismes génétiquement modifiés, pathogènes ou exotiques en milieu confiné sont ainsi tenus de notifier leur activité (classes 1 et 2) ou de demander une autorisation (classes 3 et 4).

Nous avons pris connaissance, avec grand intérêt, des informations concernant les activités et prestations proposées par votre laboratoire « Hackuarium », qui pourraient par ailleurs tomber dans le champ d’application de l’OUC. En effet, et selon le type de matériel utilisé (par ex. organismes génétiquement modifiés ou pathogènes) ainsi que la nature et l’ampleur de vos activités, ces dernières pourraient être soumises au devoir de notifier selon l’OUC. Mais avant d’entreprendre des démarches qui pourraient s’avérer finalement inutiles, je vous propose de consulter d’abord les informations disponibles sur le site du Bureau de Biotechnologie de la Confédération puis de reprendre contact avec nos services afin de clarifier au mieux votre situation.

N’hésitez à me contacter en tout temps si vous avez des questions ou besoin d’informations supplémentaires.


Pivot Points

Here we develop and tackle down the most critical points of this project. The idea is to estimate if our space can accommodate such an infrastructure and if our community has the shoulders to carry the necessary responsibilities. The points have to be assessed keeping in mind the first standardized lab procedure that will be globally used by the lab (see generalized procedure).

Lab room and material

Here we discuss the size features and needed characteristics of the room we are going to use for the lab. We also describe a material list we would need to equip the lab to the minimum.

Room features

Material

All the details for the material we would need is on the following doc: https://docs.google.com/spreadsheets/d/1tBvxEk4UVtvzfeW_-yR9yNbrLmC1V9IDjAPit37TzAg/edit#gid=1606970814

Waste eliminations

Here we describe who can and accepts to eliminate our wastes at what cost and try to estimate the frequency of elimination. We base the frequency on a per project base. How many liters of cultures are produced per production? How many biowaste bag can be filled in a week? etc...

Procedure

Based on: http://www.cusstr.ch/repository/138.pdf

  • Les souches non pathogènes et non modifiées génétiquement ne nécessitent pas d’inactivation. Les déchets liquides peuvent être éliminés dans l’évier pour autant qu’il n’y ait pas d’autres contaminants p.ex. chimiques ou radioactifs. Les déchets solides doivent être éliminés avec les déchets incinérables, avec les mêmes restrictions que les liquides.
  • Tout matériel de laboratoire contaminé par un OGM de classe 1 doit être inactivé avant élimination pour une filière de déchet normal. Un marquage clair des sacs à déchets biologiques doit être effectué afin de pouvoir identifier aisément les déchets autoclavés de ceux qui ne l’ont pas encore été. Par exemple, le sac auroclavé sera transféré dans un autre sac de couleur différente ne laissant plus apparaître le sigle biohazard et le contenu.
  • Les objets tranchants ou coupants doivent être éliminés comme déchets spéciaux.

In english in a sentence Bio-waste bags have to be clearly distinguishable from other waste bags for example with the bio-hazard sign on them. Once inactivated (i.e. autoclaved) you have to package the waste in a way that it neither doesn't look nor doesn't smell disgusting or dangerous. Then you can discard it as household waste. If this is not possible, it needs to be discarded as special waste, how it is done at EPFL (white bag with red stripes).

Service providers

Since the bags of solid wastes can be eliminated through the classical way and the autoclaved liquids can be poured to the toilets the cost can be estimated negligible.
No need for special waste removal

Calculated base costs

  • Here we estimate the cost of starting the whole setup.
  • We take a standardized method which is documented lower (protocol) based only on biology with e.coli.
  • The costs are detailed on the doc below and is calculated on the academic standards.
  • The goal then is to find hacks and shortcuts to largely cut the costs and make it affordable.

https://docs.google.com/spreadsheets/d/1tBvxEk4UVtvzfeW_-yR9yNbrLmC1V9IDjAPit37TzAg/edit#gid=0

Softwares and Databases

Here we discuss the gene editing softwares to design plasmids, primers and gene building blocks. A total transparency has to be implemented in order for people to follow our activities. What kind of database will we use to store the ordered primers sequences? Same for the plasmids?

Softwares

  • Geneious powerful but the file format is not opensource or genebank
  • Snapgene never tried, anyone ?

Database

Providers

Here we discuss the possible service providers, their costs and if they are ready to deal with us. We canot create plasmids without primers or genes and therefore need providers. We cannot confirm the authenticity of our work without a verified plasmid sequence and therefore need sequencing services.

Primers

Sequencing

Genes

Legal

Hackpad first exploration document : https://hackpad.com/Wanna-go-P1--I8F1GOCYTR9 (Most of the necessary infos can be found here)
As said previously our laboratory practices have to be irreproachable. We carry the "hacker" label and therefore, for the public opinion and the built of trust, cannot fuck around. We need to study in depth several aspects of the legislation governing genetic manipulation.

WHO

The very good lab safety manual right here
Go through it if you have the time or are curious, safety in the lab is everybody's job.

Swiss legislation

On Feb 3 2016, we got some pointers from the Vice Dean of the School of Biology of UniL who passed us information from Audvion.ch (Ingénieur de sécurité MSST)

From: Objet: AVP réponse biosécurité Re: Laboratoires P1 Date: 3 février 2016 13:58:56 UTC+1

Pour toutes les questions de sécurité biologique (biosécurité) les règles de base sont données dans deux ordonnances doit :

Vous pouvez aussi consulter

  • Le site de la CUSSTR (Commission universitaire pour la santé et la sécurité au travail romande) http://cusstr.ch/fr/doc/technique/detail/?idcat=14
  • Un petit aide mémoire de la SUVA sur le sujet (missing link)
  • Vous référer au coordinateur de biosécurité BSO de votre département

On Feb 25 2016, we got some more pointers from the Office fédéral de la santé publique OFSP

L’office fédéral de la santé publique (OFSP) est, en collaboration avec l’office fédéral de l’environnement (OFEV), responsable pour les aspects de sécurité biologique en Suisse. L'ordonnance sur l'utilisation des organismes en milieu confiné (ordonnance sur l’utilisation confinée, OUC ; RS 814.912) règle l'utilisation d'organismes génétiquement modifiés, pathogènes ou exotiques en milieu confiné (par ex. laboratoires de recherche, de diagnostic ou d’enseignement et développement). Cette ordonnance a pour but de protéger l’être humain, les animaux et l'environnement des menaces et atteintes possibles résultant de l’utilisation en milieu confiné de tels organismes. Les instituts, les entreprises et les organisations qui utilisent des organismes génétiquement modifiés, pathogènes ou exotiques en milieu confiné sont ainsi tenus de notifier leur activité (classes 1 et 2) ou de demander une autorisation (classes 3 et 4).

Nous avons pris connaissance, avec grand intérêt, des informations concernant les activités et prestations proposées par votre laboratoire « Hackuarium », qui pourraient par ailleurs tomber dans le champ d’application de l’OUC. En effet, et selon le type de matériel utilisé (par ex. organismes génétiquement modifiés ou pathogènes) ainsi que la nature et l’ampleur de vos activités, ces dernières pourraient être soumises au devoir de notifier selon l’OUC. Mais avant d’entreprendre des démarches qui pourraient s’avérer finalement inutiles, je vous propose de consulter d’abord les informations disponibles sur le site du Bureau de Biotechnologie de la Confédération (http://www.bafu.admin.ch/biotechnologie/01744/01745/index.html?lang=fr ) puis de reprendre contact avec nos services afin de clarifier au mieux votre situation.

BioSafety Officier (BSO)

Courses : http://www.bafu.admin.ch/biotechnologie/01744/02964/index.html?lang=f Infos: BSO, niveau de sécurité 1 (BSL1_2016)
Date: 9 septembre 2016 (1 jour)
Lieu: Université de Berne
Inscription d'ici au 30 juin 2016 à: registration@curriculum-biosafety.ch
Coûts: 550 francs par personne
Langue: anglais

Annonce confédération

Through the BAFU portail

Norms



Generalized procedure

These procedure will be implemented in the lab as first benchmark in order to have a work basis.
The "project request" procedure will be a way to ensure complete transparency and applicability. It will have to be filled before any project can start by any member willing to perform GMO activities.

They are optimized for cost & material efficiency.

Project Request

Develop a document/wiki page as template where people will have to explain the GMO they want to produce.
As an idea it could be a form or a wiki page that anybody could see structured as the following

  • Goal:
- What is the purpose of the GMO / protein you want to create OR: What question should it help you answer
ex: - Sense endocrine disruptors / Produce methane / Produce dyes
  • How does it help reach your goal
ex: - This enzyme is known to biochemically produce red dye (add source)
ex: - The combination of protein A,B&C could produce a sensor...
  • Plasmid
- Tell which plasmid you will use (for archive purpose)
- Give the code of the cassette you will use
- Give the peptide translation of such cassette
  • Template
- If you want to use several building blocks for you proteins, give details on the templates
  • Primers
- Give the primers you are going to use to realise your clones

Storage and Nomenclature

A recurrent behavior, often observed in institutionalized spaces, where the followup on ones item naming and storage procedure is inexistant, is the massive loss of time to find a special item belonging to a past member. Here we describe a strict naming procedure for items that is, we think, unambiguous and still logical.

Users

Oppositely to the Hackuarium's "P0" lab where users can come and experiment in the greatest of liberties the P1, as previously stated, will be restricted to card holders having followed an initiatory course. Each user will be registered in a database and will chose a three letter OR digit code to identify items made by himself. Example:

  • John Doe : joh
  • Martin Luther King : mlk
  • George Junior : gj2

This three letter acronym is practical as it is short enough to be stuck on small tubes with a descriptor i.e: joh_p7 (John Doe Plasmid 7)

Descriptors

In the process of producing for example a protein from scratch (from synthetic DNA) only a few items have to be stored and conserved for further use. These items often in the forms of solutions rarely exceed volumes of 200ul. Therefore the whole process of protein engineering and plasmid creation can hold in 1.5ml tubes stored in 96well cardboard freezer boxes. We list what we extimate should be conserved for further uses by other collaborators and give them a single letter code.

  • project/task/job : j
  • DNA segments : d
  • primers/amorces : a
  • plasmids : p
  • proteins/constructs : c
  • bacteria/strain : b

These six items are the valuable items to be stored. The project (j) item might seem counter intuitive but makes sense in the whole nomenclature system. Let's give some examples with the hypothetical John Doe project 41 (i.e joh_j41).

  • He might do a plasmid (joh_j41_p1) that sadly he failed so he produced four more for sequencing (joh_j41_p2, joh_j41_p3, joh_j41_p4, joh_j41_p5).
  • The plasmid was a construction of a vector (joh_j41_dV) and two inserts (joh_j41_dI1, joh_j41_dI2)
  • The latter were made with six primers (joh_j41_a1, joh_j41_a2, joh_j41_a3, joh_j41_a4, joh_j41_a5, joh_j41_a6)
  • He finally made it and expressed his protein (joh_j41_c1) (Usually you only make a protein from a plasmid so if you re-express, as a 3rd batch, it later on: joh_j41_c3)

The nomenclature might appear cumbersome at some point but it should make more sense once the final project draft is presented.

Storage

When you're in the working process, the following behavior is observed: You open the freezer, look for the box containing the items of interest (generally you have a primer box, a plasmid box, etc.), open the box and in those 96 tubes you want to find them by looking at the top of them. The "morphology" of a 1.5ml tube gives you only two options: You can write on the top only limited information. Forget about markers they will fade away unless you add transparent tape on top (which is boring). Or you can add stickers on the side of the tube that can contain more details on the content. So the following storage procedure will be observed:

  • Boxes will only contain a single type of items such as primers, plasmids or proteins.
  • Each item of whatever sort will have a unique 4 letter/digit hex code preceded by the type of item. That's roughly 65500 possibilities. This code is preceded by the adequate descriptor. Example: joh_j41_p1 (the plasmid N°1 of John's project 41) was given by the system the code p019A this is 5 letters which perfectly fit on a 1.5ml tube top if printed on a sticker. Again this looks cumbersome know but will make more sense later since the system gives and stores all the info for you.

Job page

We presented previously the request form. This form generates for you a wiki project page or whatever online lab-book that we still have to find. The final idea is that on the server the access to these code and data is easily accessible from a terminal in the P1 lab. Here is an hypothetical project job page and how it should look like in the end after the form has been filled.
When somebody works and experimentally gets the product design then he can directly fill the page or the online lab-book that should transfer the data. A final page, with experimental data filled in should look like this
If a page is filled with such details, reproducibility and experimental follow-up is much easier. The important point is having a strong automation of the main points so as to avoid time loss of creating manually those files (took me more than 30 min making a complete one by hand, it should not take more than 10 and should be done while doing the experiment).
» Project request form with above points is now here.

Bacterial

All of these components have to be open source.
Strain: e.coli
Plasmid:
Resistance: Ampicilin

DNA Amplification / Cloning

  • Good old openTaq
  • DNA fragment purification by gel extraction. (cheap, easy, no need of DPNI enzymes)
  • Ligation through modified Gibson (lysed bacterial supernatant + enzymatic complementation (Exonuclease mostly), To investigate further see the SLiCE method)
  • Transformation in chemo competent cells by heat shock (way cheaper than electro-competent cells)
  • Usual LB-agar plating with ampicilin selection
  • How do we purify the DNA from the cultures ? (yeah of course we can use qiagen minipreps but it's expensive...) There is an easy spermidine DNA prep that works all the times and costs nothing.

Primers production

Can we inspire ourselves from the cheap DIY peptide synthetiser and turn it to a primer systhetiser ? Source: http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4045704/#!po=52.8409

Cultures

  • e.coli chemo competent cells will be stored in a -80°C fridge.
  • Transformation will be made by heat shock as described in ("doc name here").
  • Classical LB-Amp plating with static overnight 37°C incubation.
  • Liquid cultures can be either made as:
  • LB-Amp followed by IPTG induction.
(-) IPTG is expensive
(-) Monitoring of optical density requires time + UV-spectro
(-) Large volumes (1L medium in 5L flasks) for decent yields + large capacity incubator cooling to 16°C = more waste
(-) Have to centrifuge in 500ml flasks = more post-culture work.
(+) yields are often good, procedure is bulletproof
  • Modified auto-inducible Terrific-Broth (TB-of-doom)
(-) more complex medium preparation (can still be made as large stock)
(+/-) yields are good but proteins might be hard to extract
(+) No UV monitoring ("by eye check"), after growth expression can be made at room temp.
(+) small 100ml cultures in 500ml flasks
(+) all post-culture fork can be made in 2x50 ml flasks (convenient)

Protein purification

  • Purification can be made by single His tag purification
  • We have more than 200ml of Ni-NTA resin
  • The resin can be recycled easily
  • Quite simple procedure (requires 3 buffers)
(-) Single His-tag purif will not yield absolutely pure proteins


  • Concentration
problem remains to be solved
  • Storage will be done at -20°C in 40% glycerol

Yeast

Yeast specialists please provide a protocol applicable here, keep in mind cost & material optimization.

OP Greenhouse Effect

Building the P1 in a green house... I can already smell ideas fresh as spring flourishing in there...

Idea

This clever and original idea was brought to us by our master of "let's just do it it's gonna work anyways" Gustavo, congratulation to him!
Therefore we can buy a greenhouse for a reasonable price and set it up as a P1. The size will be indeed smaller but will be enough to accomodate the transformation, growth, cell lysis and waste storage until elimination.
Several greenhouses models are presented with a rationale on which one to pick.
The end of the document is supplemented with tasks and points to investigate

Greenhouses

We indeed aim for the best size/price ratio.

  • Serre Delia, Hornbach, 11m2, 1399.- link
Initial idea
(-) Expensive
(+) Higher at the wall/roof junction (1m40) than the others. Still 1m40 is not very high.
  • Serre Vida XL, 12.25m2, VidaXL, 399.- link
(+)Free delivery
(+)Cheap
(-)Low at the wall/roof junction (95cm). BUT! For the price we can get 2 and add the two walls on top of the other giving 1.9m!.

Building Plan

Greenhouse on top


We can build the greenhouse in the corner there for the following reasons:

  • 1. We can fix it to two walls
  • 2. Add benches in front for people working outside to see what is inside (+ safety)
  • 3. The benches can also ensure things are not going to be leaning against the walls

Tasks

General

  • 1. Members validate the idea or propose other ideas until Wed.
  • 2. Ordering and building all together on the 2nd of Oct.

Material

  • 1. Rearrange lab space (on Oct2)
  • 2. Think about a list of vital chems and consumables that are needed and could be stored in the P1 for easier access.
look at: https://docs.google.com/spreadsheets/d/1tBvxEk4UVtvzfeW_-yR9yNbrLmC1V9IDjAPit37TzAg/edit#gid=0 and select the vital items.

Safety

  • 1. Announce our first activity on the confederation website (Yann)
  • 2. Design the safety standard operating procedures (SOP) such as:
What to do if a spillage of contaminated liquid occurs (how to clean it).
What to do if you get injured working with bacteria.
How to eliminate wastes, liquid and solid.
Standard lab behavior (blouse, glasses, gloves)
Where to store: acids, bases, solvents -> Rules for using each of them (how bases and acids have to be separated separately)
A very good example : http://ehs.berkeley.edu/standard-operating-procedures
  • 3. Print the following decals
Biohazard 2x
Authorized personnel only
"Wash your hands when done"
"Max X users inside" (X to be defined)
  • 4. Find an easy an accessible way to put blouses and glasses (gloves can be stored and boxes left above the bench)
  • 5. Make instrument procedures (print and put in a folder)

Ideas & Concerns

  • As the name says it's a greenhouse, how do we make sure it doesn't become super warm ? Can we make a cheap air cycling system ?

Lab Setup

An idea: Can be discussed

the essential in 12m2